While installing package kernel-6.2.7-pclos1-1-1pclos2023: /usr/share/plymouth/themes/Quait2022-PCLinuxOS/Quait2022-PCLinuxOS.plymouth does not exist defaulting background resolution to 1024x768 While installing package kernel-devel-6.2.7-pclos1-1-1pclos2023: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all..... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. akvcam.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/akvcam/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. bbswitch.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/acpi/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all....... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. wl.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/broadcom-wl/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. ddcci.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/ddcci-driver-linux/ ddcci-backlight.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/ddcci-driver-linux/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. hid-kye.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/digimend/ hid-uclogic.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/digimend/ hid-polostar.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/digimend/ hid-viewsonic.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/digimend/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' SKIP_STACK_VALIDATION=1....(bad exit status: 2) Error! Bad return status for module build on kernel: 6.2.7-pclos1 (x86_64) Consult the make.log in the build directory /var/lib/dkms/evdi/1.12.0-1pclos2022/build/ for more information. Error! Could not locate evdi.ko.xz for module evdi in the DKMS tree. You must run a dkms build for kernel 6.2.7-pclos1 (x86_64) first. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all..... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. facetimehd.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/facetimehd/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all..... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. wacom_dkms.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/linuxwacom/ wacom_w8001_dkms.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/linuxwacom/ wacom_i2c_dkms.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/linuxwacom/ depmod..... DKMS: install Completed. Error! DKMS tree does not contain: it87-package Build cannot continue without the proper tree. Error! DKMS tree does not contain: it87-package Build cannot continue without the proper tree. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area....(bad exit status: 2) export IGNORE_CC_MISMATCH=1;'make' SYSSRC=/lib/modules/6.2.7-pclos1/build module SKIP_STACK_VALIDATION=1........... cleaning build area....(bad exit status: 2) cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. nvidia340.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. nvidiabl.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/extra/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1;'make' -j16 SYSSRC=/lib/modules/6.2.7-pclos1/build modules SKIP_STACK_VALIDATION=1......... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. nvidia-current.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ nvidia-modeset.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ nvidia-drm.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ nvidia-uvm.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ nvidia-peermem.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/drivers/char/drm/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' KSRC=/lib/modules/6.2.7-pclos1/build EXTRA_CFLAGS='-DCONFIG_R8152_NAPI -DCONFIG_R8152_VLAN -DRTL8152_S5_WOL' SKIP_STACK_VALIDATION=1 all..... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. r8152.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/r8152-53/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build EXTRA_CFLAGS=' -DCONFIG_R8168_NAPI=y -DCONFIG_R8168_VLAN=y -DCONFIG_ASPM=y -DENABLE_S5WOL=y -DENABLE_EEE=y ' SKIP_STACK_VALIDATION=1 modules....... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. r8168.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/R8168/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all..... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtbth.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rt3290/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all........................... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8188gu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8188gu/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all............................ cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8192ee_lwf.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/RTL8192EE_lwf/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.............................. cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8192eu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/RTL8192EU/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all........................ cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8723bu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8723bu/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.............................. cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8812au.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8812au/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all........................... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8814au.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8814au/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all................................ cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8821au.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8821au/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all................................. cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8821ce.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8821ce/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all..................................... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8821cu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8821cu/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all......................................................... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl8852au.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl8852au/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all...................................... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtl88x2bu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtl88x2bu/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all........... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtw_pci.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8723de.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8723d.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822be.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822b.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822ce.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822c.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8821ce.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8821c.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_core.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8723du.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822bu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822cu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8821cu.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_usb.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822bs.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8822cs.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ rtw_8821cs.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw88/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all............ cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtw89pci.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852a.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852ae.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852b.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852be.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852c.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw_8852ce.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ rtw89core.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. rtw89_btusb.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89-BT/ rtw89_btrtl.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/rtlwifi-rtw89-BT/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all.... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. tuxedo_keyboard.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/tuxedo/ clevo_wmi.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/tuxedo/ clevo_acpi.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/tuxedo/ tuxedo_io.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/tuxedo/ uniwill_wmi.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/tuxedo/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all...... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. v4l2loopback.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/v4l2loopback/ depmod..... DKMS: install Completed. Preparing kernel 6.2.7-pclos1 for module build: (This is not compiling a kernel, just preparing kernel symbols) Storing current .config to be restored when complete Running Generic preparation routine make clean....(bad exit status: 2) using /boot/config-6.2.7-pclos1 make oldconfig.... make prepare.... Building module: cleaning build area.... export IGNORE_CC_MISMATCH=1; 'make' clean KSRC=/lib/modules/6.2.7-pclos1/build SKIP_STACK_VALIDATION=1 all...... cleaning build area.... cleaning kernel tree (make clean)....(bad exit status: 2) DKMS: build Completed. v4l2loopback-dc.ko.xz: - Installation - Installing to /lib/modules/6.2.7-pclos1/kernel/3rdparty/v4l2loopback-droidcam/ depmod..... DKMS: install Completed. Generating grub configuration file ... Found theme: /boot/grub2/themes/pclinuxos/theme.txt Found linux image: /boot/vmlinuz-6.2.7-pclos1 Found initrd image: /boot/initrd-6.2.7-pclos1.img Found linux image: /boot/vmlinuz-6.2.6-pclos1 Found initrd image: /boot/initrd-6.2.6-pclos1.img Found linux image: /boot/vmlinuz-5.15.102-pclos1 Found initrd image: /boot/initrd-5.15.102-pclos1.img Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. Found Windows Boot Manager on /dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi Adding boot menu entry for UEFI Firmware Settings ... done